Use these basic checks when you need to access repeater settings or when devices connected through the repeater are not receiving normal network access. Management options can vary by repeater model and network setup.
Before Checking the Connection
[checklist] * Your device is connected to the extended Wi-Fi network * Network settings are configured to obtain an IP address automatically * The main router is operating normally * The repeater is connected to the main router [/checklist]Management Page Access
If your Xiaomi Wifi Repeater model provides a browser-based management page and the page cannot be reached, start with the network connection rather than changing advanced settings.
[step] 1. Connect your device to the Wi-Fi network extended by the repeater. 2. Confirm that the device is set to obtain its IP address automatically. 3. If the repeater is already connected to the router, check the router's DHCP client list for the repeater's current IP address. 4. Use the current repeater address only if your model supports browser-based management. 5. If the normal access checks do not help, reconfiguration or a reset may be considered as a final basic step for the applicable model. [/step] [note] The repeater's network address may be assigned by the main router after connection. The available management method can also differ between Xiaomi Wifi Repeater models. [/note]Connected Device Has No IP or Internet Access
If a device connects to the repeater but does not receive an IP address or cannot reach the Internet, check the router and repeater connection before changing more advanced network settings.
[troubleshoot] Problem: The repeater management page cannot be reached Cause: The device may not be connected to the extended network, automatic IP assignment may be disabled, or the repeater may have received a different address from the router. Fix: Connect to the extended network, enable automatic IP assignment, and check the router's DHCP client list for the repeater's current address when applicable. Problem: A connected device does not receive an IP address or Internet access Cause: Wireless MAC filtering, wireless access control, or an access control list may be restricting the repeater or connected devices. Fix: Review the router's wireless access-control settings and disable the relevant restriction temporarily if appropriate for your network. Problem: Devices connect to the repeater but network access is still unavailable Cause: The repeater may not have completed its connection to the main router. Fix: Confirm the repeater is connected to the router. If necessary, reconfigure the repeater using the setup method supported by the model. Problem: IP assignment remains unavailable after the connection checks Cause: The router may have an address-allocation conflict or may have reached its connected-device limit. Fix: Restart the router and check the connection again. If the repeater still needs to be configured again, reset and reconfigure it only after the basic router checks are complete. [/troubleshoot]Router Access Controls
Router security and access-control features can prevent the repeater or devices behind it from receiving normal network access. Relevant settings may include:
- Wireless MAC filtering
- Wireless access control
- Access control lists (ACL)
- Limits on the number of connected devices